Якая ўстаноўка крутоўнага моманту для гайкі на ўстаўцы для Toyota Tundra?
Усталёўваючы кола на Toyota Tundra, вы павінны праверыць дакладны крутоўны момант у кіраўніцтве па эксплуатацыі. Налады крутоўнага моманту гайкі Toyota Tundra вар'іруюцца ў залежнасці ад падмадэлі, тыпу выкарыстоўванага колы, года і камплектацыі, ад 85 ft-lb і 150 ft-lb.
Каб належным чынам зацягнуць колавыя гайкі ў адпаведнасці са спецыфікацыямі, рэкамендаванымі вытворцам (паміж 85 ft-lb і 150 ft-lb depending on year/submodel/trim/type of wheel - please always check your Toyota Tundra Owner manual for the exact setting!) you will need an accurate and properly calibrated torque wrench. Please make sure that the круцяцца гайкі альбо балты while the wheel is "in the air" but the vehicle has been lowered, which means the wheel has to be as close to the ground as possible, almost touching the ground or pavement (use wheel chocks to stop the wheel from spinning when torquing the wheel nuts or bolts). This is to ensure proper torque reading and wheel setting.
For safety reasons, in order to avoid vehicle damage or personal injury, proper lifting equipment is required when torquing the lug nuts on your Toyota Tundra. Only use the jacking points indicated in your Toyota Tundra Owner Manual, and always activate the emergency brake before jacking the car. In addition, use jack stands properly placed under your vehicle when leaving the car suspended for a while, or if you have to трапіць пад машыну па любой прычыне.
Не перакручвайце і не круціце круцячыя гайкі на вашай Toyota Tundra!